欢迎光临九江桥梁管理官方网站!
九江桥梁管理 九江桥梁管理 桥梁养护 · 检测 · 招标 · 规范信息服务平台
服务热线

检测技术

当前位置:首页>新闻中心>桥梁检测>检测技术
全部 1940 桥梁养护 1102 桥梁检测 838

钢箱梁裂纹检测机器人受力分析与运动控制研究:浙江沪杭甬联合西南交大设计搭载涡流检测设备的磁吸附爬壁机器人,Webots仿真验证越焊缝通过能力

时间:2026-10-23   访问量:1002

针对钢箱梁疲劳裂纹人工检测存在效率低、风险高及定量能力不足等问题,开展了面向钢箱梁裂纹检测的磁吸附式爬壁机器人受力分析与运动控制研究。结合钢箱梁顶板与横隔板裂纹巡检需求,设计了搭载涡流检测设备的爬壁机器人,确定了整机尺寸、负载能力、运行速度等关键参数。建立了机器人的静力学与动力学模型,分析了其在钢板表面的最小磁吸附力需求及驱动转矩要求。基于Webots平台,对机器人在不同负载及焊缝障碍条件下的运动过程进行了仿真分析。结果表明:该机器人能够实现横隔板与顶板之间的连续运动;随着负载增加,机器人在横隔板上的起速时间延长、速度波动加剧,而在顶板上的运动相对平稳;在越过焊缝时,机器人速度出现短时波动,俯仰角随负载增加而明显增大,但整体仍保持较好的通过能力与运动稳定性。关键词:钢箱梁 /裂纹检测 /磁吸附式爬壁机器人 /受力分析 /运动控制Abstract:
To address the low efficiency, high risk, and limited quantitative capability of manual inspection for fatigue cracks in steel box girders, a study was conducted on the force analysis and motion control of a magnetic wall-climbing robot for crack inspection. According to the crack inspection requirements for deck plates and diaphragms, a wall-climbing robot equipped with an eddy current testing device was designed, and key parameters including overall dimensions, payload capacity, and operating speed were determined. Static and dynamic models of the robot were established to analyze the minimum magnetic adhesion force and driving torque required on steel plate surfaces. Based on the Webots platform, simulations were carried out to investigate the robot’s motion under different payload and weld obstacle conditions. The results showed that the robot could move continuously between the diaphragm and deck plate. As the payload increased, the start-up time on the diaphragm became longer and speed fluctuation became more pronounced, while the motion on the deck plate remained relatively stable. When crossing a weld, short-term speed fluctuations occurred, and the pitch angle increased significantly with the rising payload. Overall, the robot still maintained good obstacle-crossing capability and motion stability.Key words:
steel box girder /
crack inspection /
magnetic wall-climbing robot /
force analysis /
motion controlHTML全文参考文献(20)[1] |
郭健,张国良,黄健,等. 大跨钢箱梁疲劳裂纹探测识别技术发展与对比研究[J/OL]. 中国公路学报,2026[2026-03-04]. https://link.cnki.net/urlid/61.1313.u.20260304.0952.002.[2] |
GUO J,HANG D,ZHU X J. Prediction of crack propagation in U-rib components based on the Markov chain[J]. Journal of Bridge Engineering,2020,25(10):04020089.[3] |
GUO J,ZHANG X W,CUI Y H. Estimation of fatigue parameters and life prediction for orthotropic steel deck based on reverse Markov theory[J]. Journal of Structural Engineering,2025,151(5):04025037.[4] |
NGUYEN S T,LA H M. A climbing robot for steel bridge inspection[J/OL]. Journal of Intelligent & Robotic Systems,2021,102(4)[2021-07-05]. https://doi.org/10.1007/s10846-020-01266-1.[5] |
TAO B,GONG Z Y,DING H. Climbing robots for manufacturing[J]. National Science Review,2023,10(5):nwad042.[6] |
LI B,USHIRODA K,YANG L,et al. Wall-climbing robot for non-destructive evaluation using impact-echo and metric learning SVM[J]. International Journal of Intelligent Robotics and Applications,2017,1(3):255- 270.[7] |
NGUYEN S T,LA K T,LA H M. Agile robotic inspection of steel structures:a bicycle‐like approach with multisensor integration[J]. Journal of Field Robotics,2024,41(2):396- 419.[8] |
LA H M,DINH T H,PHAM N H,et al. Automated robotic monitoring and inspection of steel structures and bridges[J]. Robotica,2019,37(5):947- 967.[9] |
李心诚,傅中秋,树加凯,等. 正交异性钢桥面板磁轮式攀爬机器人的结构动态设计与优化[J]. 中南大学学报(自然科学版),2025,56(6):2236- 2247.[10] |
陈伟乐,朱尧于,黎啸宇,等. 履带式钢箱梁内部巡检机器人病害检测系统[J]. 中国公路学报,2026,39(1):99- 112.[11] |
WANG R,KAWAMURA Y. Development of climbing robot for steel bridge inspection[J]. Industrial Robot:An International Journal,2016,43(4):429- 447.[12] |
PAGANO D,LIU D. An approach for real-time motion planning of an inchworm robot in complex steel bridge environments[J]. Robotica,2017,35(6):1280- 1309.[13] |
SONG W,WANG Z,WANG T,et al. A path tracking method of a wall-climbing robot towards autonomous inspection of steel box girder[J]. Machines,2022,10(4):10040256.[14] |
郭 健,钟陈杰,吴继熠,等. 西堠门大桥涡激振动特征分析[J]. 工程力学,2023,40(增刊1):39- 45.[15] |
XIAO Z G,YAMADA K,YA S,et al. Stress analyses and fatigue evaluation of rib-to-deck joints in steel orthotropic decks[J]. International Journal of Fatigue,2008,30(8):1387- 1397.[16] |
YA S,YAMADA K,ISHIKAWA T. Fatigue evaluation of rib-to-deck welded joints of orthotropic steel bridge deck[J]. Journal of Bridge Engineering,2011,16(4):492- 499.[17] |
XUE J M,CHEN J Y,STANCU A,et al. Spatial trajectory tracking of wall-climbing robot on cylindrical tank surface using backstepping sliding-mode control[J]. Micromachines,2023,14(3):548.[18] |
TAKADA Y,ITO S,IMAJO N. Development of a bridge inspection robot capable of traveling on splicing parts[J]. Inventions,2017,2(3):22.[19] |
JIANG Z,ZHAO Z,CHEN B,et al. Design and analysis of a passive adaptive wall-climbing robot based on five-bar mechanisms[J]. Ocean Engineering,2024,298:117140.[20] |
LI J,WU J Y,TU C L,et al. Spatial positioning robotic system for autonomous inspection of LPG tanks[J]. Industrial Robot:the International Journal of Robotics Research and Application,2023,50(1):70- 83.相关文章施引文献资源附件(0)访问统计PDF下载( 1528 KB)XML下载导出引用
Turn off MathJax计量文章访问数:173HTML全文浏览量:33PDF下载量:被引次数: 0出版历程收稿日期:2026-04-08网络出版日期:2026-06-06刊出日期:2026-05-20-->目录×Close导出文件文件类别
RIS(可直接使用Endnote编辑器进行编辑)
Bib(可直接使用Latex编辑器进行编辑)Txt引用内容
引文——仅导出文章的Citation信息
引文和摘要——导出文章的Citation信息和文章摘要信息导出关闭下载:全尺寸图片 幻灯片返回文章分享-->用微信扫码二维码分享至好友和朋友圈返回期刊在线特色专题当期目录过刊浏览下载排行浏览排行引用排行
Submit Online


来源:《工业建筑》2026年第56卷第5期
原文标题:钢箱梁裂纹检测机器人受力分析与运动控制研究:浙江沪杭甬联合西南交大设计搭载涡流检测设备的磁吸附爬壁机器人,Webots仿真验证越焊缝通过能力
原文链接:http://gyjz.ic-mag.com/cn/article/doi/10.3724/j.gyjzG26040802
转载时间:2026-10-23

免责声明:本文内容转载自互联网,仅供学习交流参考,不构成任何投标或经营建议。招投标活动请以原文发布平台及招标人正式公告为准。

上一篇:高原环境下公路桥梁多源无损检测数据融合研究以折巴尼洋河大桥为例:回弹法加半电池电位法加碳化深度构建融合体系,96处病害评定为2类87.9分

下一篇:高速公路桥梁工程沉降监测实施规程:基准点设在桥外50米外形成闭合水准网,观测标用14毫米不锈钢埋入墩台顶面,中误差须小于允许变形值的十分之一至二十分之一

发表评论:

评论记录:

未查询到任何数据!

在线咨询

点击这里给我发消息 售前咨询专员

点击这里给我发消息 售后服务专员

在线咨询

免费通话

24小时免费咨询

请输入您的联系电话,座机请加区号

免费通话

微信扫一扫

微信联系
返回顶部